APC Smart-UPS On-Line, 20kVA/20kW, Rack/Tower, 230V/380V…415V, Hard wire 5-wire(3P+N+E)+3-wire(1P+N+E), Network Card, W/O rail kit
|
Run time for load
W information_stroke
Min-max: 2000-20000 W
|
3min 1s
|
|---|---|
|
Max. Capacity Used
information_stroke
|
100 % |
| Main Input Voltage | 380…415 V 3 phases 230 V |
| Other Input Voltage | 220…240 V |
| Main Output Voltage | 380…415 V 3 phases 230 V 1 phase |
| Other Output Voltage | 230 V |
| Rated power in W | 20000 W |
| Rated power in VA | 20000 VA |
| output connector type | Hard wire 5 wire (3P + N + E) 1 Hard wire 3-wire (1P + N + E) 1 IEC connector 3-wire (1P + N + E) 1 |
| Number of rack unit | 7U |
| Battery type | Lead-acid battery |
| provided equipment | Smart UPS signalling RS-232 cable |
| Number of power module free slots | 0 |
|---|---|
| Number of power module filled slots | 0 |
| Redundant | No |
| colour | Black |
|---|---|
| Height | 30.6 cm |
| Width | 440 mm |
| Depth | 70.0 cm |
| Net weight | 142.5 kg |
| Mounting location | Front |
| Mounting preference | Lower |
| Mounting mode | Rack-mounted |
| Two post mountable | 0 |
| USB compatible | No |
| network frequency | 40…70 Hz auto-sensing |
|---|---|
| number of input connectors | 1 hard wire 5 wire (3P + N + E) 1 hard wire 3-wire (1P + N + E) |
| input voltage limits | 160…285 V 380 V 380…415 V |
| Maximum input current | 87 A |
| Switching current capacity | 125 A |
| Input harmonic distortion | Less than 5 % for full load |
| input current | 87 A |
| Load power factor | From 0.9 leading to 1 lagging |
| Maximum configurable power in W | 20000 W |
|---|---|
| Harmonic distortion | Less than 5 % |
| output frequency | 50/60 Hz +/- 0.1 Hz sync to mains |
| Crest factor | 3 : 1 |
| UPS type | Double conversion online |
| Wave type | Sine wave |
| Output overload operation | 60 seconds at 125% and 30 seconds at 150% |
| Bypass type | Built-in static bypass |
| efficiency | 93 % (in battery operation) |
| full load runtime | 00:03:30 20000 W |
| half load runtime | 00:09:30 10000 W |
| Maximum configurable power in VA | 20000 VA |
| Product certifications | CB |
|---|---|
| standards | EN/IEC 60204-1 EN/IEC 60204-2 |
| Ambient air temperature for operation | 0…40 °C |
|---|---|
| relative humidity | 0…95 % non-condensing |
| Operating altitude | 0…3000 m |
| Ambient air temperature for storage | -15…45 °C |
| storage Relative Humidity | 0…95 % non-condensing |
| Storage altitude | 0…15000 m |
| Acoustic level | 58 dBA |
| Heat dissipation | 3821 Btu/h |
| IP degree of protection | IP20 |
| Run Time | View Runtime Graph
action_new_window
|
|---|---|
| Efficiency | View Efficiency Graph
action_new_window
|
| Number of battery filled slots | 0 |
| Number of battery free slots | 0 |
| Battery recharge time | 4 h |
| Number of battery replacement quantity | 0 |
| Additional information | Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage |
| Battery voltage | +/- 192 V |
| battery charger power | 2160 W rated |
| Battery power in VAH | 3265 VAh capacity 3265 VAh runtime |
| Battery life | 3…5 year(s) |
| Replacement battery | APCRBC172
action_new_window
|
| battery option | SRTG192XLBP2 1 6912 VAh SRTG192XLBP2 2 10617 VAh SRTG192XLBP2 3 13824 VAh SRTG192XLBP2 4 17280 VAh |
| Extended runtime | 1 |
| Free slots | 0 |
|---|---|
| Preinstalled device | Network management card |
| alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| Emergency power off | Yes |
| Noise suppression | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
|---|
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 535 mm |
| Package 1 Width | 790 mm |
| Package 1 Length | 590 mm |
| Package 1 Weight | 157.2 kg |
| Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
|---|
Acumulat din 0 comentarii
Doar clientii autentificati, care au cumparat acest produs pot lasa un comentariu
Nu sunt comentarii despre acest produs