QNAP Switch TS-464eU-8G
The TS-464eU is powered by Intel® Celeron® N5095 quad-core processor (burst up to 2.9 GHz). The space-efficient short depth design makes it easy to install in small media cabinets or places with a lot of cabling. With expandable storage capacity and feature-rich apps, the TS-464eU surpasses the previous generation.
The TS-464eU uses the QTS operating system by default. You will be able to switch to using the QuTS hero operating system. QuTS hero provides benefits such as ZFS data integrity and WORM technology to prevent data tampering. (Switching to QuTS hero is supported starting from QTS 5.2.2.)
-
2.5GbE connectivity
Up to 5 Gbps transfer speeds can be achieved by setting port trunking with the two built-in 2.5GbE ports.
-
HDMI™ Output
Supports 4K media playback and real-time transcoding.
-
NVMe SSD application
Two M.2 PCIe NVMe SSD slots support Qtier™ auto-tiering technology and SSD caching.
-
USB interface
Two USB 3.2 Gen 2 10Gbps ports for faster data transfer.
-
Backup and data recovery
Protects PC/Macs, virtual machines, software containers, cloud data, and SaaS services.
-
Hybrid cloud applications
Cloud storage gateways realize hybrid cloud applications by working with the cache space reserved on NAS.
| CPU |
Intel® Celeron® N5095 4-core/4-thread processor, burst up to 2.9 GHz |
| CPU Architecture |
64-bit x86 |
| Graphic Processors |
Intel® UHD Graphics |
| Floating Point Unit |
|
| Encryption Engine |
(AES-NI) |
| Hardware-accelerated Transcoding |
|
| System Memory |
8 GB SODIMM DDR4 (1 x 8 GB)
Since 2024/01
|
| Maximum Memory |
16 GB (2 x 8GB) |
| Flash Memory |
4GB (Dual boot OS protection) |
| Drive Bay |
4 x 3.5-inch SATA 6Gb/s, 3Gb/s |
| Drive Compatibility |
3.5-inch SATA hard disk drives
2.5-inch SATA solid state drives |
| Hot-swappable |
|
| M.2 Slot |
2 x M.2 2280 PCIe Gen 3 x1 slots
|
| SSD Cache Acceleration Support |
|
| 2.5 Gigabit Ethernet Port (2.5G/1G/100M) |
2 (2.5G/1G/100M/10M) |
| Wake on LAN (WOL) |
|
| Jumbo Frame |
|
| USB 2.0 port |
2 |
| USB 3.2 Gen 2 (10Gbps) Port |
2 x Type A USB 3.2 Gen 2 |
| HDMI™ Output |
1, HDMI™ 1.4b |
| Form Factor |
1U Short Depth Rackmount |
| LED Indicators |
Power/Status, LAN, USB, HDD1-4, M.2 SSD 1-2 |
| Buttons |
Power, Reset |
| Dimensions (HxWxD) |
43.3 × 430 × 292.1 mm |
| Weight (Net) |
4.96 kg |
| Weight (Gross) |
5.9 kg |
| Operating Temperature |
0 – 40 °C (32°F – 104°F) |
| Storage Temperature |
-20 – 70°C (-4°F – 158°F) |
| Relative Humidity |
5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
| Power Supply Unit |
100W PSU, 100-240V |
| Power Consumption: Disk Standby Mode |
21.105 |
| Power Consumption: Operating Mode, Typical |
35.297 W
Tested with drives fully populated.
|
| Fan |
3 x 40mm |
| System Warning |
Buzzer |
| Standard Warranty |
3 |
| Max. Number of Concurrent Connections (CIFS) – with Max. Memory |
1500 |
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications and refer to the hardware user manual to install compatible QNAP memory modules.
Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
QNAP reserves the right to replace partial parts or accessories if the original is no longer available from its manufacturer/supplier. Any replacement would be fully tested and verified to meet strict compatibility and stability guidelines and will deliver identical performance to the original.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.
Български
English
Français
Deutsch
Ελληνικά
Magyar
Nu sunt comentarii despre acest produs