Ubiquiti airFiber 24 GHz Bridge (AF-24)
AF-24 delivers up to 1.4+ Gbps throughput at a range of up to 13+ km.
Revolutionary Wireless Technology.
Introducing airFiber, a truly revolutionary 24 GHz Point-to-Point radio from Ubiquiti. Housed in a compact, highly efficient form factor, airFiber delivers revolutionary performance of 1.4+ Gbps, aggregate throughput and 13+ km in range. airFiber ushers in a new era in price disruptive, carrier-class backhaul technology. Supports 24 GHz frequencies.
Features:
-
-
- Supports 24 GHz frequencies
- 13+ km transmission range
- Powered with the included 50V, 1.2A PoE Gigabit Ethernet adapter
- (1) 10/100 Ethernet port (configuration and auxiliary)
- (1) 10/100/1000 Ethernet port
- 1.5+ Gbps aggregate throughput
- 50W maximum power consumption
- (8) status LEDs that denote port speed, activity, RF status, and GPS synchronization
- Included pole mounting kit
-
Note. Price shown is for a single unit. airFiber is normally purchased in pairs to form a single link.
| Mechanical | |
|---|---|
| Dimensions | 649 x 426 x 303 mm (25.55 x 16.77 x 11.93″) |
| Weight | 10.5 kg (23.15 lb) |
| Mounting | Pole mount kit (Included) |
| Wind loading | 480 N @ 200 km/h (108 lbf @ 125 mph) |
| Wind survivability | 200 km/h (125 mph) |
| Hardware | |
| Networking interface | (1) 10/100/1000 MbE port (1) 10/100 MbE port |
| Auxiliary port | (1) RJ-12, alignment tone port |
| Power method | Passive PoE |
| Power supply | 50V, 1.2A PoE GigE adapter (Included) |
| Supported voltage range | 42—58V DC |
| Max. power consumption | 50 W |
| Operating frequency | 24.05 – 24.25 GHz |
| Operating temperature | -40 to 55° C (-40 to 131° F) |
| Certifications | CE, FCC, IC |
| System | |
| Max. throughput | 1.5+ Gbps |
| Ma. range | 13+ km |
| Packets per second | 1+ million |
| Encryption | 128-bit AES |
| Uplink/Downlink ratio | 50% fixed |
| RF | |
| GPS | GPS clock synchronization |
| EIRP | ~33 dBm (FCC/IC) ~20 dBm (CE) ~40 dBm (Other Regions) |
| Frequency accuracy | ±2.5 ppm without GPS synchronization ±0.2 ppm with GPS synchronization |
| Channel bandwidth | 100 MHz |
| Operating frequency | 24.05 – 24.25 GHz |
| Operating channels | 24.1 GHz, 24.2 GHz |
| Modulation | 64QAM MIMO 16QAM MIMO QPSK MIMO QPSK SISO ¼x QPSK SISO |
| Gain TX RX |
33 dBi 38 dBi |
| Beamwidth | < 3.5° |
| Front-to-back ratio | 70 dB |
| Polarization | Dual-slant |
| Cross-polarity Iiolation | > 28 dB |
| LEDs | |
| System | (8) Status LEDs: Data port speed Data port link/activity Configuration port speed Configuration port link/activity GPS synchronization Modulation mode Master/slave RF status (1) Two-digit LED display calibrated in dBm |
Acumulat din 0 comentarii
Doar clientii autentificati, care au cumparat acest produs pot lasa un comentariu
Produse similare
-
Meraki, wireless LAN, Wireless
Meraki MR42E
Focused coverage and flexibility
Cloud-managed, supports auto-detectable external antennas, has dedicated security and Bluetooth Low Energy radios
The Cisco Meraki MR42E is a cloud-managed 3×3 MIMO 802.11ac Wave 2 access point. Designed for general purpose deployments in offices, schools, shops, and hotels, the MR42E provides performance, security, and manageability. The MR42E provides a maximum 1.9 Gbps frame rate with concurrent 802.11ac Wave 2 and 802.11n 3×3:3 MIMO radios, and security and spectrum visibility via a third radio dedicated to 24×7 WIDS/WIPS and automated RF optimization. An integrated Bluetooth low energy (BLE) radio delivers Beacon functionality and BLE device scanning.
SKU: MR42E-HW -
Meraki, wireless LAN, Wireless
Meraki MR42
802.11ac Wave 2 with Dedicated Security & Bluetooth Beacons
Cloud management, 802.11ac performance, and a dedicated security radio
The Cisco Meraki MR42 is a four radio, cloud-managed 3×3 MU-MIMO 802.11ac Wave 2 access point. Designed for next-generation deployments in offices, schools, hospitals, shops, and hotels, the MR42 offers performance, security, and simple management.
SKU: MR42-HW -
Nu sunt comentarii despre acest produs