, ,

Ubiquiti UniFi Access Reader Lite (UA-Reader Lite)


UniFi Access Starter Kit contains everything you need to set up the next generation, state-of-the-art access control system for your business. Compatible with most Electric Bolts/Strikes and Magnetic Locks, the UniFi Access Starter Kit is easily installed with minimal effort and offers the convenience of the UniFi Access Controller, which allows you to easily manage users, visitors, schedules, and access policies. The UniFi Access Starter kit is powered by native PoE technology.

Pretul afisat contine TVA (19%).

627,28 lei

Compara

Ubiquiti UniFi Access Reader Lite (UA-Reader Lite)

 

 

A convenient door access scanner supporting NFC reader and handwave door unlocking.

Unlock using an NFC card or UniFi Identity mobile app

Additional handwave unlock functionality

Connects to UniFi Access Hub using PoE

SKU: UA-Reader Lite Categorii: , ,
Mechanical
Dimensions 94.9 x 40 x 31.1 mm (3.7 x 1.6 x 1.2″)
Weight 67 g (2.4 oz)
Enclosure material Polycarbonate
Mounting options Wall-mount, gang box mount*
*The UA-Reader Lite must be installed either indoors or under a roof eave outdoors.
Weatherproofing IP54
Hardware
Networking interface 10/100 MbE
Max. power consumption 6W
Power method PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range 44–57V DC
Button (1) Factory reset
LEDs White/Blue
Connectivity Ethernet, BLE 4.1
NFC frequency 13.56 MHz
NFC reading range <30 mm
NFC standards ISO 14443A, 14443B, 15693
NFC technology NFC Tag 1, 2, 3, 4, 5
MIFARE Classic
MIFARE Plus
MIFARE Ultralight
MIFARE DESFire
Operating environment Outdoor use
Ambient operating temperature -20 to 40° C (-4 to 104° F)
Ambient operating humidity 5 to 90% noncondensing
Software information The software version of a product can be checked at https://unifi.ui.com
UL 294 level Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade Grade assignment: I
Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level UA-Reader Lite, V02
LED
System Steady blue: Adopted/device is ready
Steady white: Pending adoption
Blinking white/blue: Upgrading firmware
Software
Management application UniFi Access: Version 1.5.9 and later

Acumulat din 0 comentarii

0.0 overall
0
0
0
0
0

Doar clientii autentificati, care au cumparat acest produs pot lasa un comentariu

Nu sunt comentarii despre acest produs

conecteaza-te
ai nevoie de ajutor?
Buna ziua,
Cu ce te putem ajuta?