Door Access, Ubiquiti, Unifi
Pretul afisat contine TVA (19%).
Ubiquiti UniFi Reader Lite (UA-Reader Lite)
626,99 lei
Ubiquiti UniFi Reader Lite (UA-Reader Lite)
A convenient door access scanner supporting NFC reader and handwave door unlocking.
Unlock using an NFC card or UniFi Identity mobile app
Additional handwave unlock functionality
Connects to UniFi Access Hub using PoE
| Mechanical | |
|---|---|
| Dimensions | 94.9 x 40 x 31.1 mm (3.7 x 1.6 x 1.2″) |
| Weight | 67 g (2.4 oz) |
| Enclosure material | Polycarbonate |
| Mounting options | Wall-mount, gang box mount* *The UA-Reader Lite must be installed either indoors or under a roof eave outdoors. |
| Weatherproofing | IP54 |
| Hardware | |
| Networking interface | 10/100 MbE |
| Max. power consumption | 6W |
| Power method | PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU |
| Supported voltage range | 44–57V DC |
| Button | (1) Factory reset |
| LEDs | White/Blue |
| Connectivity | Ethernet, BLE 4.1 |
| NFC frequency | 13.56 MHz |
| NFC reading range | <30 mm |
| NFC standards | ISO 14443A, 14443B, 15693 |
| NFC technology | NFC Tag 1, 2, 3, 4, 5 MIFARE Classic MIFARE Plus MIFARE Ultralight MIFARE DESFire |
| Operating environment | Outdoor use |
| Ambient operating temperature | -20 to 40° C (-4 to 104° F) |
| Ambient operating humidity | 5 to 90% noncondensing |
| Software information | The software version of a product can be checked at https://unifi.ui.com |
| UL 294 level | Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I |
| UL 294 statement | Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| PoE cabling requirements | Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. |
| CAN/ULC-60839-11-1 Grade | Grade assignment: I |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document number, and issue date and/or revision level | UA-Reader Lite, V02 |
| LED | |
| System | Steady blue: Adopted/device is ready Steady white: Pending adoption Blinking white/blue: Upgrading firmware |
| Software | |
| Management application | UniFi Access: Version 1.5.9 and later |
Acumulat din 0 comentarii
Doar clientii autentificati, care au cumparat acest produs pot lasa un comentariu
Produse similare
-
-
Ubiquiti, UISP, Accessory Tech
Ubiquiti Isolator Radome for 620 mm Dish Reflector – IsoBeam™ (ISO-Beam-620)
Ubiquiti, UISP, Accessory TechUbiquiti Isolator Radome for 620 mm Dish Reflector – IsoBeam™ (ISO-Beam-620)
Isolator Radome for 620 mm Dish Reflector
The IsoBeam™ provides breakthrough isolation performance for co‑location deployments of Point-to-Point (PtP) links and backhauls.
5GHZ
SKU: ISO-Beam-620 -
Nu sunt comentarii despre acest produs