Ubiquiti Unifi Enterprise Campus 24 PoE (ECS-24-PoE (1050W)
(8) 2.5 GbE PoE+++, (16) 10 GbE PoE+++ ports
(2) 25G SFP28 ports
(2) included hot-swappable power modules, with power sharing to expand total PoE availability, or 1+1 redundancy
(4) included hot-swappable fan modules, with 3+1 redundancy
*Recommend pairing it with Enterprise Campus Aggregation.
| Mechanical | |
|---|---|
| Dimensions | 442 x 496 x 44 mm (17.4 x 19.5 x 1.7″) |
| Weight | Without mounting brackets: 9.2 kg (20.3 lb) With mounting brackets: 9.3 kg (20.5 lb) |
| Enclosure material | SGCC steel |
| Slide rails support | The rails support 482.6 mm (19″) four-post racks with square holes (9.5 x 9.5 mm) and posts depths ranging from 650 to 1,000 mm (25.6–39.4”) |
| Hardware | |
| Management interface | Ethernet In-Band |
| Networking interface | (16) 10 GbE RJ45 ports (8) 2.5 GbE RJ45 ports (2) 25G SFP28 ports |
| PoE interface | (24) 90W PoE+++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)* *802.3bt Type 4, Class 8 |
| Total non-blocking throughput | 230 Gbps |
| Switching capacity | 460 Gbps |
| Forwarding rate | 342.24 Mpps |
| Power method | (2) Universal input, 100—240V AC, 50/60 Hz |
| Power supply | (2) Hot-swappable AC/DC 600W power modules* *Can be swapped with the AC/DC 1.2kW power module (sold separately) to increase the total PoE capacity. |
| Supported voltage range | 100—240V AC |
| Max. power consumption | Excluding PoE output: 150W Including PoE output: 1,200W |
| Total available PoE | 1,050W* *With (2) 600W power modules. The second power module can provide redundant or additional power to PoE ports as needed. |
| Max. PoE wattage per port by PSE | PoE+++: 90W |
| Voltage range PoE mode | 50—57V |
| LCM display | (1) 1.3″ touchscreen |
| Button | Factory reset |
| Ambient operating temperature | -5 to 40° C (23 to 104° F) |
| Ambient operating humidity | 10 to 90% noncondensing |
| Certifications | CE, FCC, IC |
| Switching Features | |
| Layer 2 features | IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLs |
| Layer 3 features | DHCP for locally-managed networks DHCP relay Inter-VLAN routing between networks on same switch Static routing between local networks Network isolation with ACLs |
| Etherlighting™ | |
| Ethernet | Locating Speed/link Native VLAN/network |
| SFP28 | Locating Speed/link Native VLAN/network |
| LEDs | |
| System | Status |
Acumulat din 0 comentarii
Doar clientii autentificati, care au cumparat acest produs pot lasa un comentariu
Produse similare
-
Ubiquiti, UISP, Accessory Tech
Ubiquiti Isolator Radome for 620 mm Dish Reflector – IsoBeam™ (ISO-Beam-620)
Ubiquiti, UISP, Accessory TechUbiquiti Isolator Radome for 620 mm Dish Reflector – IsoBeam™ (ISO-Beam-620)
Isolator Radome for 620 mm Dish Reflector
The IsoBeam™ provides breakthrough isolation performance for co‑location deployments of Point-to-Point (PtP) links and backhauls.
5GHZ
SKU: ISO-Beam-620 -
Ubiquiti, UISP, Wireless, Wireless
Ubiquiti airMAX NanoBeam 2AC 13 dBi Station (NBE-2AC-13)
High-Performance airMAX® ac Bridge
Incorporating innovative industrial design with proprietary airMAX® ac technology, the NanoBeam® AC is ideal for CPE deployments requiring maximum performance from the smallest possible footprint.
2.4GHZ 5GHZ 450+MBPS 10+ kmRANGE
SKU: NBE-2AC-13
Nu sunt comentarii despre acest produs