Ubiquiti UniFi Switch Enterprise Campus 48 PoE (ECS-48-PoE (950W)
Enterprise-grade, Layer 3 Etherlighting™ PoE switch with (16) 2.5 GbE PoE+++, (32) 10 GbE PoE+++, and (4) 25G SFP28 ports for high availability system design.
(16) 2.5 GbE PoE+++, (32) 10 GbE PoE+++ ports
(4) 25G SFP28 ports
(2) included hot-swappable power modules for redundancy
(4) included hot-swappable fan modules, with 3+1 redundancy
*Recommend being paired with Enterprise Campus Aggregation.
| Mechanical | |
|---|---|
| Dimensions | 442 x 496 x 44 mm (17.4 x 19.5 x 1.7″) |
| Weight | Without mounting brackets: 9.5 kg (20.9 lb) With mounting brackets: 9.6 kg (21.1 lb) |
| Enclosure material | SGCC steel |
| Slide rails support | The rails support 482.6 mm (19″) four-post racks with square holes (9.5 x 9.5 mm) and posts depths ranging from 650 to 1,000 mm (25.6–39.4”) |
| Hardware | |
| Management interface | Ethernet In-Band |
| Networking interface | (32) 10/5/2.5/1 GbE, 100/10 MbE RJ45 ports (16) 2.5/1 GbE, 100/10 MbE RJ45 ports (4) 25/10/1G SFP28 ports |
| PoE interface | (48) 90W PoE+++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)* *802.3bt Type 4, Class 8 |
| Total non-blocking throughput | 460 Gbps |
| Switching capacity | 920 Gbps |
| Forwarding rate | 684.48 Mpps |
| Power method | (2) Universal input, 100—240V AC, 50/60 Hz |
| Power supply | (2) Hot-swappable AC/DC 1,200W power modules |
| Max. power consumption | Excluding PoE output: 250W Including PoE output: 2,400W |
| Total available PoE | 950W |
| Max. PoE wattage per port by PSE | PoE+++: 90W |
| Voltage range PoE mode | 50—57V |
| Fan method | (4) hot-swappable fan modules* *Fan modules operate with 3 + 1 redundancy. |
| LCM display | (1) 1.3″ touchscreen |
| Button | Factory reset |
| Ambient operating temperature | -5 to 40° C (23 to 104° F) |
| Ambient operating humidity | 10 to 90% noncondensing |
| Certifications | CE, FCC, IC |
| Switching Features | |
| Layer 2 features | IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLs |
| Layer 3 features | DHCP for locally-managed networks DHCP relay Inter-VLAN routing between networks on same switch Static routing between local networks Network isolation with ACLs |
| Etherlighting™ | |
| Ethernet | Locating Speed/link Native VLAN/network |
| SFP28 | Locating Speed/link Native VLAN/network |
| LEDs | |
| System | Status |
| Ethernet | Link/activity |
Acumulat din 0 comentarii
Doar clientii autentificati, care au cumparat acest produs pot lasa un comentariu
Produse similare
-
Ubiquiti, UISP, Wireless, Wireless
Ubiquiti airMAX IsoStation 5AC Bridge (IS-5AC)
Shielded airMAX® CPE
With a die-cast aluminum base and interchangeable antenna, the IsoStation™ is available in two models and brings increased performance to your network using technology that isolates beam communications between your devices. The IsoStation AC delivers throughput speeds of up to 450+ Mbps.SC/APC
5GHZ 450+MBPS
SKU: IS-5AC -
Nu sunt comentarii despre acest produs